/** Font types */

Posts Tagged ‘creativity prompt’

Creativity Prompt – How To Make a Felt Bookmark

Friday, June 5th, 2009

How To Make a Felt Bookmark
I am equally [i.e. very] passionate about two things: making stuff and reading… Therefore, it is only natural that sooner or later I came up with a way to combine both by making bookmarks – so cute I sometimes stare at them for a while before I start reading (another oddity you’ve learned about me).

A few years back, when I had no time for arts and crafts – working looooong hours at the office – I purchased a laminating machine, making bookmarks for my self and for my parents and for my sisters and… Well, you got the picture. Sadly the laminating machine passed away after we had moved to Ireland. It never made it to California. Technically speaking it didn’t even make it to Ireland…

Well, when laminating is out of the question, lets pull out our felt stash and make the cutest bookmark e-v-e-r! Are you with me on that?

Tools & Supply

How To


[Music by the talented Josh Woodward from his album: “The Simple Life”]

Step by Step Instructions

  1. Cut two pieces of felt to your desired bookmark’s size (mine were 9¼” by 1½”).
  2. Trace one of your felt strips on a piece of plain cardstock.
  3. Align the edge of your traced rectangular with the ¼” mark of your ruler and draw a line – both lengthwise and widthwise, then cut the smaller rectangle with sharp scissors.
  4. Make s felt “sandwich”, by placing the cardstock strip between the 2 felt strips. temporarily adhere the cardstock to the felt with a [permanent] tape runner.
  5. Take your ruler and place it about an 1/8th of an inch from the edge of your felt sandwich and mark at each ¼” as a sewing guide for later on. Keep on marking all around the rectangle’s edges – you can also make smaller marks, depending on your desired stitch’s size.
  6. To allow your ribbon to easily go through the button’s holes, cut both ends to a pointy edge, then thread it through 2 of the button’s holes. Cut the excess ribbon off and protect the edges from fraying by applying a tiny dab of Diamond Glaze.
  7. We are using the button as a tool to finish off the sewing, as we cannot conceal the knot anywhere else. Therefore thread the embroidery floss through the button and into the flower and then through the felt sandwich. Leave a long tale for your knot at the end.
  8. Keep on stitching the edges of the felt sandwich with a backstitch.
  9. Secure your sewing by threading the embroidery floss back through the flower and the button and tying it in a knot with the tail you’ve left before. A dab of diamond glaze will keep the knot secured.

Felt bookmarkFelt bookmarkFelt bookmark

Share

If you have any question, suggestion or remark – don’t hesitate to contact me – either leave a comment here, use the contact form or start a new thread on the Creativity Prompt Flickr Group!!!

I would also be very happy to see your own creations, so don’t be shy and share 🙂

If you liked this post you may want to subscribe to my feed:

Creativity Prompt – How To Make A Cute Box Of Drawers

Friday, May 22nd, 2009

A Cute Box Of DrawersOK. I’ll admit it. I am addicted. Addicted to boxes… Luckily I have been moving a lot in the past years, so I got to buy boxes and treys over and over again. I just LOVE that everything has its place. Be it the tiniest of places, but a dedicated one.

Therefore when I saw this idea of a box of drawers online (in numerous places) I immediately knew that this project is right up my alley. So I whipped up my own version of this project with a couple quick sketches and voilà, in about 20 minutes I had one more box to add to my collection.

Usage Ideas for the Box of Drawers

  • Sewing kit – A place for your threads, threaders and needles.
  • Embellishments center (as shown above) – You can put your buttons, paper flowers, die cuts, eyelets and brads all in one place.
  • Office supply organizer – A chic way to camouflage your paper clips and staples stash…
  • Family “Mail-Box” – Attach a name tag to each drawer and leave heartfelt notes to each other. (This project can accommodate any family size, just alter the height of the drawers for a smaller family, or add more drawers and alter the height of the box for a bigger family).

I’d love to hear what ideas you come up with… so please do share!

So if you feel like making your own box of drawers keep on reading:

Tools & Supply

How To


[The great music is by Josh Woodward from his album “Here Today”].

Step-by-step Instructions

  1. Drawers –
    1. Cut 4 pieces of 5″ by 5″ cardstock. [The following applies to each of the 4 pieces]
    2. Score at 1″ all around. To make it easier to score, align your cardstock with the 4″ mark on your paper trimmer.
    3. Fold all your score lines with a bone folder.
    4. Cut one slit on each flap up to the first score line.
    5. Apply strong adhesive to the back of each flap. Make sure the flap is covered entirely.
    6. Adhere all the flaps together to the edges of the drawer, aligning edge to edge.
  2. Body –
    1. Cut your cardstock at 4″ by 12″. You can use patterned cardstock.
    2. Score your cardstock at: 3″, 6″ & 9″ lengthwise and fold all your score lines with a bone folder.
    3. Score LIGHTLY widthwise at each 1″ to draw some guidelines for the placement of the drawers.
    4. Apply a strong double sided tape to each of the box’s walls in increments of 1″.
    5. To embellish the inside of the boxes cut 6 pieces of patterned paper, as follows: 2 pieces at 2¾” by 2¾”, 2 pieces at 1¾” by 2¾” and 2 pieces at ¾” by 2¾” – Round their corners and ink the edges with distress ink. Then adhere to their respective place on the interior of the box.
    6. Adhere the drawers to the box. Make sure not to place a drawer nor to apply adhesive on any of the score lines.
  3. Lid –
    1. Cut your cardstock at: 5¼” by 5¼”.
    2. Score at 1″ all around. [Again you can align your cardstock with the paper trimmer’s 4¼” mark].
    3. Cut a slit on each of the flaps up to the first score line.
    4. To decorate the lid, cut a piece of 3″ by 3″ patterned paper. Round its edges and ink it up with distress ink, then adhere to the center of your cardstock.
    5. Apply strong double-sided tape to the back of each of the flaps and adhere together, aligning edge with edge.

A Cute Box Of Drawers A Cute Box Of Drawers

Share

If you have any question, suggestion or remark – don’t hesitate to contact me – either leave a comment here, use the contact form or start a new thread on the Creativity Prompt Flickr Group!!!

I would also be very happy to see your own creations, so don’t be shy and share 🙂

Creativity Prompt – Working With Sketches – Scrapbook Layouts

Friday, May 15th, 2009

Last week we were using sketches to make handmade cards. This week we go back to our trusty Adobe Photoshop Elements 7.0 or handy-dandy grid paper and plan scrapbook layouts.

The idea is the same – planning the layout in advance helps in looking at the design as a whole, making sure it is harmonious, balanced and complete.

Also using a grid helps to figure out all the measurements for us and all we have left to do is to pull out our supply, cropped photos, paper trimmer and grid ruler and start playing.

In scrapbooking there is an additional advantage which is the ability to use the sketch as a layout template for digital scrapbooking. To learn how to use a digital layout template check out this nifty video by Jessica Sprague.

As a bonus to my fabulous readers I am making this week’s sketch available for a free download (for personal use only) both for digital and traditional scrapbookers. Just click on the right button below:

free template downloadfree template download

Translating the sketch into a layout –


[Music is by: Josh Woodward]

Some tips & techniques shared on the video

  • Use the grid ruler to find the center of your cardstock (or any other element) easily. After finding the center, it’s really easy to figure out the right placement.
  • Use the grid ruler to align your elements together. Just place the ruler on your element and make sure the grid line is aligned with the edge of your element and that the ruler protrudes from the edge at the exact size of your desired gap, then align the next element with the ruler’s edge.
  • Use your paper trimmer together with a stylus to create straight journaling guides. Just score your journaling box or journaling tag at every ¼”.
  • To create a perfect half circle notch, just temporary adhere your photos on a scrap piece of paper (junk mail will do just fine) with the same alignment as they are supposed to have on your layout. Then punch out your half circle, using an hand-held punch.
  • When using a colorful and vibrant photos on top of a bright-colored background you can add interest without overwhelming the eye by using either lace cardstock or an overlay instead of regular patterned paper.
  • Embossing adds texture and interest. To emphasize the embossing use a cardstock with a white core (or otherwise different colored core cardstock) and lightly sand it to reveal the core on the embossed image.

Share

If you have any question, suggestion or remark – don’t hesitate to contact me – either leave a comment here, use the contact form or start a new thread on the Creativity Prompt Flickr group!!!

I would be VERY happy to see your layouts based off of the sketch here, so don’t be shy and share – either leave a link at the comment section or share on the Creativity Prompt Flickr group‘s pool 🙂

Creativity Prompt – Working With Sketches – Cards

Friday, May 8th, 2009

Working With Sketches - CardsWhenever I feel uninspired I try to change the way I go about my work. Lately I have been feeling I am getting into a creative rut and just haven’t been feeling “in the zone”. That’s why I have decided to get out of my comfort zone (which is designing “as I go”) and try something I do not usually do – plan the project in advance…

I went ahead and used my Adobe Photoshop Elements 7.0, that makes my life a lot easier, but the same can be achieved with a simple grid paper, a ruler and some shape templates.

The benefits of using a sketch

  1. Seeing the big picture. Sometimes only after the fact I see that some elements don’t go well together. The scale isn’t right or the space between the elements is either too big or too small. The design is too busy or too empty. By sketching the design on a scratch piece of paper (or a computer file) I can see if things work out or not, before pulling out the expensive products and adhering them down.
  2. Easy placement and measuring. Working on a grid does the measuring for you. Instead of calculating how tall and how wide should be a panel in a 3 panels design, with an even gap between the panels and the edges of the card… – you just draw the shapes and start counting the square slots… Nothing gets easier than that. Translating the sketch onto your project is easy with the use of a T-Square ruler or a grid ruler. One square on the ruler is usually the same as one square on the grid you’re working with (usually an 1/8″ square)
  3. An inspirations boost. Although it seems conversely, using a sketch with bare elements actually sparks your creativity and do not limit it. Each element in your sketch can be interpreted in a million ways. You can play with different products, textures, dimensions and so on and so forth. As the design is taken care of you are free to think about the rest of the elements without fearing it wouldn’t work out.

I was working on some card sketches, and this is what I came up with:

Cards Sketch

[Click on the sketch for a larger view. Feel free use the sketches for personal use]

These are the cards I made using the sketches:

Sketchy Card

Sketchy Card

Sketchy Card

Sketchy Card

Take a look at how I made this last card:

Share

If you have any question, suggestion or remark – don’t hesitate to contact me – either leave a comment here, use the contact form or start a new thread on the Creativity Prompt Flickr group!!!

I would be VERY happy to see your cards based off these sketches, so don’t be shy and share – either leave a link at the comment section or share on the Creativity Prompt Flickr group‘s pool 🙂

Bonus Creativity Prompt – Mini Tag Book For Mother’s Day

Saturday, May 2nd, 2009

Mother's Day Mini Tag Book

Mother’s Day is coming soon so I came up with a fun project for FaveCrafts that I believe your mom will treasure.

The idea is to treat your mom as your valentine and write her micro love letters compiled together in a whimsical mini book.

For Step By Step instructions, just click on the Favecrafts banner below 🙂

FaveCrafts.com Crafts, Home Decor, Scrapbooking, Quilting, and More

Happy National Scrapbooking Day – Make something pretty …

Creativity Prompt – How To Make An Accordion Fold Mini Album

Friday, May 1st, 2009

Accordion Fold Mini AlbumThere are days in which I want to color the world around me in the colors of the rainbow. Days in which some “pick me up” color treatment wouldn’t hurt. Do you also have days like these sometimes? If so, then I have the perfect project: A rainbow colored mini album with an accordion fold spine and to finish things off, it is covered in a soft fun foam. (Is it wrong to cuddle with your mini-album? I am not sure I want to hear the answer…)

So if you want to learn how I made this cutie, stay tuned and keep on reading:

Tools and Supply

how To


[Music by Josh woodward]

Step By Step Instructions

  1. To make your spine, cut your cardstock at: 4″ by 8″.
  2. Score the cardstock at 1½” on each side and then every ½” in between the initial score lines.
  3. Fold all your score lines in an accordion fold. That means a “mountain” fold (folding down) is followed by a “valley” fold (folding up). Make sure your creases are sharp by burnishing them well with the bone folder.
  4. Cut the 5 cardstock signatures – 4″ by 8″ each. Score them at 4″ and fold in half.
  5. Attach the signatures by applying a strong double-sided tape adhesive to each of the ½” folds. Apply the adhesive as close as possible to the crease but not directly on it. Apply some additional tape adhesive runner to all 4 inside edges of the signatures and attach to the spine. “Hug” each “mountain” fold in the spine with 1 signature.
  6. For the cover cut your fun foam at 4½” by 12″.
  7. Lay down your signatures on the fun foam and make sure you have enough room to cover them and then start marking the remaining flap, as follows:
    • Find the middle (lengthwise) and make two pencil marks – ½” downward and upward from the middle [That is going to help us create a 1″ flap in the middle].
    • With a T-Square ruler, draw lines that connect the edges with your tick marks – both lengthwise and widthwise.
    • Cut out the outer rectangles with your scissors.
  8. Attach the signatures to the cover with a strong double-sided tape adhesive.
  9. Attach your Velcro to the flap. I always attach the corresponding Velcro pieces together and remove the backing from both of them. Adhere one side to the flap and then close it – that adheres the corresponding piece of Velcro at the perfect spot on the cover.

Accordion Fold Mini Album Accordion Fold Mini Album

Share

If you have any question, suggestion or remark – don’t hesitate to contact me – either leave a comment here, use the contact form or start a new thread on the Creativity Prompt Flickr Group!!!

I would also be very happy to see your own creations, so don’t be shy and share 🙂

More Creativity Prompts You Might Like:

Creativity Prompt – How To Scrapbook With Busy Patterned Papers

Friday, April 24th, 2009

My patterned paper stash

I am very susceptible to visual stimuli. That means that the recent wave of insanely cute patterned papers has driven me mad. I had to have it all (or at least everything that wasn’t already sold out). The problem starts when I get those papers and feel stumped. All of these busy patterns, as adorable as they are, are making it hard to use the patterned papers on my layouts.

Saying that, there are a couple tricks under my sleeve. Just a few pointers that can help you make use of these patterned papers rather than just hoarding them. If you are interested then keep on reading.

The Patterned Paper I used on my layouts

[Click on the photos if you want to purchase these papers at Two Peas In A Bucket]

Wall Of Fame 12X12 Anthem Paper By Sassafras Lass

Dream Big 12X12 Anthem Paper By Sassafras Lass

Pal Parade 12X12 Bungle Jungle Paper By Sassafras Lass

Fun Filled Forest Hog Heaven 12x12 paper By Sassafras Lass
Say Timber Woodland Whimsy 12x12 paper By Sassafras Lass
In Love Fawnd of You 12x12 paper By Sassafras Lass
Blossomed 12X12 Vintage Yummy Paper By Sassafras Lass
Over the Rainbow Happy Place 12x12 paper By Sassafras Lass
Piccadilly 12x12 Pocket Full of Rosies Paper By Sassafras Lass
Sunday Girl Friday Paper By Cosmo Cricket
Thursday Girl Friday Paper By Cosmo Cricket
Wednesday Girl Friday Paper By Cosmo Cricket
Cozy Home Weathervane patterned paper By October Afternoon
Gingerbread Good Cheer patterned paper By October Afternoon

TIP 1 – Use strips of the patterned paper

using a strip of patterned paper Rather than using the paper in its entirety and being overwhelmed with the busy pattern, just cut a 2″ by 12″ strip and use with a solid cardstock, accentuating the colors in this strip.

Many manufacturers offer patterned papers that already have strips of different patterns on them. That gives you a great bang for your hard earned buck.

Tip 2 – Punch or die-cut your patterned papers

Punching out the patterned paperThis technique also helps by scaling down the busy pattern. Using just a punched portion of the paper adds color and cheerfulness but doesn’t overwhelm the eye.

Tip 3 – Use portions of the patterned paper in a grid

Use portions of the patterned paper in a gridThis technique is quite similar to the latter, designed to scale down the business of the pattern by using a small portion of it.

However, this technique also adds another advatage which is the grid itself. The grid (whether it’s a grid of squares, circles, ovals, rectangles, etc.) helps to “organize” the layout and give a home to all the elements, as well as maintaining an even proximity between the different elements. These traits make the layout look cleaner, thus more forgiving to busy patterns.

In this layout I also used the special edges that come with the Sassafras Lass’s papers as a border to my grid.

Tip 4 – Cutting out elements from the paper’s pattern

Cutting out elements from the paper's pattern Working with the busy pattern may be difficult, but you can think of the patterned paper of a sheet of die-cuts (only you have to cut the elements yourself…).

Cut out the elements, without confining yourself to a certain shape or size (like you do when using punches or die cut machines). The possibilities are truly limitless.

Pair those die-cut shapes with a solid cardstock and a natural color palette and you’ve got yourself a personalized pattern, seen only on your layout.

Tip 5 – Restrict the color in your photos and other elements

When you want to convey a whimsical message with your layout, you might want to use the entire patterned paper. However you would like to tone down the color of the rest of the elements on your layout.

Use solid colors for your title and photo mats, either neutral or taken from the same color palette of the patterned paper.

You can also apply a light wash of acrylic paint on top of the patterned paper to tone it down a bit.

Don’t add too many embellishments. If you want to add more interest just cut down some of the elements and pop them up with foam dots.

Choose photos that has only one dominant color or change them to black and white or to a sepia tone. Below you can find an example of all three photo options (Altered in Adobe Photoshop Elements).

Restrict the color in your photos -color Restrict the color in your photos - black and whiteRestrict the color in your photos - sepia

You may also like this post:

Use Those Paper Scraps

Share

I hope this post has been helpful to you. I hope you will give those cute patterned papers a second chance.

If you have any question, suggestion or remark – don’t hesitate to contact me – either leave a comment here, use the contact form or start a new thread on the Creativity Prompt Flickr Group!!!

If you have more pointers on using busy patterns, I would love to hear them. Just leave a comment on this post.

I would also be very happy to see your own creations, so don’t be shy and share 🙂

Creativity Prompt – How To Make An Oval Felt Mini-album

Friday, April 17th, 2009

Felt Mini Album
Surprisingly felt costs less than cardstock. How strange is that? Michael’s offers letter size pieces of felt in many vibrant colors for only 30 cents a piece. Regardless of its price, felt adds so much more to a project than a simple piece of cardstock. It adds softness, texture, cuteness and a dash of “je ne sais quoi” that makes everything better.

For this week’s creativity prompt I teach you how to make this cutest little felt mini album. If you feel like making one, stay tuned and keep on reading.

Tools and Supply

How To


Music by josh Woodward

Step By Step Instructions

  1. Cut from your cardstock 1 big oval and 5 ovals which are ¼” smaller then the first one. The big oval will be used as a template for your felt pages and the smaller ones will be used to support the felt pages and make them more durable.
  2. Take your largest oval and lay it down on your felt. Trace around it with a marker. You will need 10 felt ovals for a 5-pages album.
  3. Cut your felt ovals out.
  4. Note: for the sake of this tutorial, I have skipped this step – which is the main one => Now it’s time for you to create your beautiful felt album pages. Make use of the felt’s special qualities. Embroider on it. Sew your pictures and patterned paper onto it (just pierce them first with an awl). Add buttons, flowers and other pieces of fabric with a needle and a thread. Be creative!!! All the back stitches will be covered in the next step.
  5. “Sandwich” each 2 felt pages with 1 cardstock “core”. Adhere the felt pages temporarily with a tape runner.
  6. Sew all around the edges of the felt “sandwich”. Make sure you don’t sew through the cardstock.
  7. As you will not be able to conceal the edges of your embroidery floss, thread them through a button and tie in a knot. this way you can secure your stitching and add a decorative finishing touch at the same time. (Tip: Add a tiny bead of diamond Glaze to your knot to prevent it from fraying later on.)
  8. Punch a hole at the top of each oval “sandwich” and set an eyelet in it. The crop-a-dile works the best. (as you can see on the video, I was trying to use a Provo Craft’s eyelet setter too and it was too hard to poke through the 3 layers of felt and cardstock).
  9. Thread your ribbon (or book binding ring) through the eyelets (Tip: Cut the ends of the ribbon in a sharp angle to make the threading easier), make a cute knot and enjoy your fuzzy mini-album.

Mini Felt Album Mini Felt Album

Share

If you have any question, suggestion or remark – don’t hesitate to contact me – either leave a comment here, use the contact form or start a new thread on the Creativity Prompt Flickr Group!!!

I would also be very happy to see your own creations, so don’t be shy and share 🙂

You might also like these tutorials:

Creativity Prompt – How To Make a Mini Album Case

Friday, April 10th, 2009

Mini Album Case It has been a while since I last designed a free template for you guys. Now it’s time to hone my limited Photoshop and reverse engineering skills and provide you with another free template. This time a template for a mini album case.

This case is perfect for a 3″ by 3″ album, for those important pictures you want to always carry with you in your bag…

I created an album, made out of 3″ by 3″ laminated cards, featuring the early days with Nadav – long before we even thought about getting married 🙂

If you feel like making a similar mini-album, or you have some other ideas for this cute little case, then stay tuned and keep on reading.

Tools & Supply

How To


[You can watch the video in HD on YouTube. While you’re there please rate & comment 🙂 ]

Step by Step Instructions

  1. Download the templates by clicking on the link at the supply list above and print the case template on cardstock and the lining template on a patterned paper. Make sure the printer’s settings are set to a letter size (8½” by 11″) and to borderless printing. Print on the back side (the smooth side of a textured cardstock and the wrong side of your patterned paper), so the lines won’t show on your finished project.
  2. Cut along all the solid lines with a craft knife and a ruler. Be careful not to cut any of the dashed lines. Finish off the curved parts with scissors, it’ll make a smoother cut along the curve.
  3. Score all the dashed lines with a stylus and a ruler.
  4. Fold all your score lines (You can use a bone folder for that).
  5. Cut along the solid lines of the lining template. You can use either scissors or a craft knife, whatever is closer you feel more comfortable with.
  6. Score along the dashed lines on the lining template and fold your score lines.
  7. Adhere your lining to the case template – make sure you are concealing the printer’s lines, which means your positioning is correct. Don’t be shy with your adhesive and apply a generous layer, especially on the edges and the score lines.
  8. Apply a strong adhesive tape to the small flaps and on the long flaps, on the right side of the template.
  9. Assemble the case and voila, it’s too easy 🙂

Few pointers regarding the mini album –

  1. Cut your cardstock to 3″ by 3″ squares (1 sheet of cardstock makes 16 squares).
  2. Adhere your photos and journal on the back.
  3. Laminate all your squares and cut the excess laminating material off.

    • Usually this type of albums gets handled often, not to mention it’s tossing and turning in your bag all the time. The laminating helps to keep the album more durable.
    • Use only flat elements on your cards so the lamination goes smoothly.

Different Views on the Project

Mini Album Case Mini Album Case

Mini Album Case Mini Album Case Mini Album Case
Mini Album Case Mini Album Case

[You can find all the photos on Flickr]

Share

If you have any question, suggestion or remark – don’t hesitate to contact me – either leave a comment here, use the contact form or start a new thread on the Creativity Prompt Flickr Group!!!

I would also be very happy to see your own creations, so don’t be shy and share 🙂

Giveaway reminder

You still have a chance to enter the drawing on Creativity Prompt for a $50 GIFT CERTIFICATE to Scrapbook.com. For more details on the giveaway click here.

Update

The contest is closed!

Creativity Prompt – How To Use Those Paper Scraps

Friday, April 3rd, 2009

How To Use Those Paper Scraps If you are anything like me then you probably have a ton of paper scraps. The scrapbooking industry keeps on wowing us with delicious patterned papers and I feel bad about throwing away any tiny little cut out… Not to mention the environmental repercussions of tossing all that paper (read: severed trees) away.

I have found a great “marriage” between my current stash of paper scrap and patterned paper which is still on my wish list. I have derived inspiration from the wonderful new collections from Sassafras Lass and recreated my own patterned paper design, while using only paper scraps.

Sassafras Lass I was particularly inspired by the “Dream Big” patterned paper from the “Anthem” collection.

So if you are interested in recreating this layout while using all your little paper scraps – stay tuned and keep on reading:

Supply –

How To –


[Go to YouTube to watch the video in HD and feel free to rate, comment and subscribe]

Step By Step Instructions –

  1. Take a piece of scrap paper (I used recycled newsprint paper) and cut it to the size of your desired design. Mine is 8″ by 8″.
  2. Cut a circle from your scrap piece of paper. It doesn’t have to be centered. Just position it whenever you’d like your focal picture to be.
  3. With a pen and a ruler start drawing your design.
  4. After you are pleased with your design, list all your individual shapes by number, this will make your life much easier later on.
  5. Cut each individual shape with your scissors. Don’t worry about the curvy part, as your focal picture would lay over it.
  6. Now it’s time to get all your paper scraps. Use as many or as little textures, colors and patterns as you like.
  7. Adhere each individual shape to the back of your paper scrap. Make sure the number faces down (just apply your adhesive to the number itself, to avoid “mishaps“). Don’t forget to rewrite the number again at the back…
  8. Using those numbers, reassemble your design and adhere all the individual shapes onto your background cardstock.
  9. Adhere your focal picture with foam adhesive. The photo doesn’t have to be circular. I just think it adds some extra flair. (You can crop your photo with a photo editing software, such as Adobe Photoshop Elements, or you can use any circle cutting system you feel comfortable with).
  10. Add your title and call it good (Well, except for some journaling).

Share –

If you have any question, suggestion or remark – don’t hesitate to contact me – either leave a comment here, use the contact form or start a new thread on the Creativity Prompt Flickr Group!!!

I would also be very happy to see your own paper-scraps creations, so don’t be shy and share 🙂